Dlp- D343 Change Sdh Threshold Settings For Stm-N Cards - Cisco ONS 15454 SDH Procedure Manual

DLP- D343 Change SDH Threshold Settings for STM-N Cards

DLP-D343 Change SDH Threshold Settings for STM-N Cards
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
For the default values and domains of user-provisionable card settings, refer to the "Network Element
Note
Defaults" appendix in the Cisco ONS 15454 SDH Reference Manual.
In node view, double-click the STM-N card where you want to change the SDH threshold settings.
Step 1
Click the Provisioning > SDH Thresholds tabs.
Step 2
Note
Modify any of the settings listed in
Step 3
fields you can choose an option from a drop-down list; in others you can type a value or select or deselect
a check box.
Click Apply.
Step 4
Table 20-26
Parameter
Port
EB
ES
SES
BBE
UAS
PPJC-PDET
Cisco ONS 15454 SDH Procedure Guide, R7.0
20-54
This task changes threshold settings for STM-N cards.
None
DLP-D60 Log into CTC, page 17-49
As needed
Onsite or remote
Provisioning or higher
If you want to modify a threshold setting, it might be necessary to click on the available
directional, type, and interval (15 Min, 1 Day) radio buttons and then click Refresh. This will
display the desired threshold setting.
STM-N Threshold Options
Description
(Display only) Port number.
1 (STM-4, STM-16, STM-64)
•
1 to 4 (OC3 IR 4/STM1 SH 1310, OC12 IR/STM4 SH 1310-4)
•
1 to 8 (OC3IR/STM1SH 1310-8)
•
1 to 12: PPM-1 (MRC-12)
•
Errored blocks. Available for Near End and Far End, VC LO or VC4.
Errored seconds. Available for Line, Section, or Path; Near End and Far
End.
Severely errored seconds. Available for Line, Section, or Path; Near End
and Far End.
Background block errors. Available for Near End and Far End, VC LO or
VC4.
Unavailable seconds. Available for Line or Path; Near End and Far End.
Positive Pointer Justification Count, STS Path Detected. Available for
Line; Near End and Far End.
Table 20-26 by clicking in the field you want to modify. In some
Chapter 20 DLPs D300 to D399
78-17194-01