Figure - Cisco ONS 15454 SDH Procedure Manual

NTP- D309 Reconfigure Circuits
As needed, complete the
Step 7
option. Delete a roll only if it cannot be completed or cancelled. Circuits might have a PARTIAL status
when this option is selected.
Stop. You have completed this procedure.
NTP-D309 Reconfigure Circuits
Purpose
Tools/Equipment
Prerequisite Procedures None
Required/As Needed
Onsite/Remote
Security Level
Complete the
Step 1
Step 2.
From the View menu, choose Go to Network View.
Step 2
Click the Circuits tab.
Step 3
Choose the circuits that you want to reconfigure.
Step 4
From the Tools menu, choose Circuits > Reconfigure Circuits.
Step 5
In the confirmation dialog box, click Yes to continue.
Step 6
In the notification box, view the reconfiguration result. Click Ok.
Step 7
Stop. You have completed this procedure.
Cisco ONS 15454 SDH Procedure Guide, R7.0
7-10
"DLP-D239 Delete a Roll" task on page
This procedure rebuilds circuits, which might be necessary when a large
number of circuits are in the PARTIAL status.
None
As needed
Onsite or remote
Provisioning or higher
"DLP-D60 Log into CTC" task on page
Chapter 7
19-43. Use caution when selecting this
17-49. If you are already logged in, continue with
Manage Circuits
78-17194-01