Alarm Column Descriptions - Cisco ONS 15454 SDH Procedure Manual

Chapter 17 DLPs D1 to D99
Table 17-3
Column
Num
Ref
New
Date
Node
Object
Eqpt Type
Shelf
Slot
Port
Path Width
Sev
ST
SA
Cond
Description
Table 17-4
Table 17-4
Color
Red
Orange
Yellow
Magenta (pink) Raised Not Alarmed (NA) condition
Blue
White
Step 2 If alarms are present, refer to the Cisco ONS 15454 SDH Troubleshooting Guide for information and
troubleshooting procedures.
78-17194-01

Alarm Column Descriptions

Information Recorded
Sequence number of the original alarm.
Reference number of the original alarm.
Indicates a new alarm; to change this status, click either the Synchronize button or
the Delete Cleared Alarms button.
Date and time of the alarm.
The name of the node where the alarm is located. Visible in network view.
TL1 access identifier (AID) for the alarmed object; for an STSmon or VTmon, this is
the monitored STS or VT.
If an alarm is raised on a card, the card type in this slot.
The shelf where the alarmed object is located. Visible in network view.
(Network and node view only) If an alarm is raised on a card, the slot where the alarm
occurred.
If an alarm is raised on a card, the port where the alarm is raised; for STSTerm and
VTTerm, the port refers to the upstream card it is partnered with.
Indicates how many STSs are contained in the alarmed path. This information
complements the alarm object notation, which is explained in the
Cisco ONS 15454 SDH Troubleshooting Guide.
Severity level: CR (Critical), MJ (Major), MN (minor), NA (Not Alarmed), or NR
(Not Reported).
Status: R (raised) or C (clear).
When checked, indicates a service-affecting alarm.
The error message/alarm name; these names are alphabetically defined in the
Cisco ONS 15454 SDH Troubleshooting Guide.
Description of the alarm.
lists the color codes for alarm and condition severities.
Color Codes for Alarms and Condition Severities
Description
Raised Critical (CR) alarm
Raised Major (MJ) alarm
Raised Minor (MN) alarm
Raised Not Reported (NR) condition
Cleared (C) alarm or condition
Cisco ONS 15454 SDH Procedure Guide, R7.0
DLP- D82 View Alarms
17-75