Figure 20-5 Gbic Installation (With Clips) - Cisco ONS 15454 SDH Procedure Manual

Chapter 20 DLPs D300 to D399
If you are using an SFP, go to
•
For GBICs with clips:
Step 4
Grip the sides of the GBIC with your thumb and forefinger and insert the GBIC into the slot on the
a.
card
Note
Figure 20-5
Plug
Slide the GBIC through the flap that covers the opening until you hear a click. The click indicates
b.
that the GBIC is locked into the slot.
When you are ready to attach the network fiber-optic cable, remove the protective plug from the
c.
GBIC, save the plug for future use, and install the fiber connector.
Continue with
d.
For GBICs with a handle:
Step 5
Remove the protective plug from the SC-type connector.
a.
78-17194-01
Step
(Figure 20-5).
GBICs are keyed to prevent incorrect installation.
GBIC Installation (with Clips)
E1000
2
FAIL
ACT
SF
RX
1
TX
ACT/LINK
ACT/LINK
RX
2
TX
Step 8.
6.
Cisco ONS 15454 SDH Procedure Guide, R7.0
DLP- D335 Install GBIC or SFP/XFP Devices
20-31