Dlp- D198 Clear An Sncp Force Switch - Cisco ONS 15454 SDH Procedure Manual

Chapter 18 DLPs D100 to D199
DLP-D198 Clear an SNCP Force Switch
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
From the View menu in node view, choose Go to Network View.
Step 1
Right-click the span where you want to clear the switch. Choose Circuits from the shortcut menu.
Step 2
In the Circuits on Span dialog box, choose CLEAR to remove the Force switch. Click Apply.
Step 3
In the Confirm SNCP Switch dialog box, click Yes.
Step 4
In the Protection Switch Result dialog box, click OK.
Step 5
In the Circuits on Span window, the Switch State for all SNCP circuits is CLEAR.
Return to your originating procedure (NTP).
Step 6
78-17194-01
This task clears an SNCP Force switch.
None
DLP-D60 Log into CTC, page 17-49
As needed
Onsite or remote
Provisioning or higher

DLP- D198 Clear an SNCP Force Switch

Cisco ONS 15454 SDH Procedure Guide, R7.0
18-85