Dlp- D207 Delete A Server Trail - Cisco ONS 15454 SDH Procedure Manual

Chapter 19 DLPs D200 to D299
Remove the dust plug from the fiber adapter.
Step 1
Insert a CLETOP stick swab (14100400) into the adapter opening and rotate the swab.
Step 2
Place dust plugs on the fiber adapters when not in use.
Step 3
Return to your originating procedure (NTP).
Step 4
DLP-D207 Delete a Server Trail
Purpose
Tools/Equipment
Prerequisite Procedures See
Required/As Needed
Onsite/Remote
Security Level
From the View menu, choose Go to Network View.
Step 1
Step 2 Click the Provisioning > Server Trails tabs.
Step 3 Click the server trail that you want to delete.
Step 4 Click Delete.
In the confirmation dialog box, click Yes.
Step 5
Return to your originating procedure (NTP).
Step 6
DLP-D208 Change External Alarms Using the AIC-I Card
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Confirm that external-device relays are wired to the ENVIR ALARMS IN pins on the MIC-A/P Front
Step 1
Mount Electrical Connection (FMEC). See the
on page 20-12
In node view, double-click the AIC-I card to display it in card view.
Step 2
Click the Provisioning > External Alarms tabs.
Step 3
78-17194-01
This task deletes a server trail.
None
Chapter 6, "Create Circuits and Low-Order Tunnels"
creation procedures.
As needed
Onsite or remote
Provisioning or higher
This task changes the external alarm settings on the AIC-I card.
None
DLP-D60 Log into CTC, page 17-49
As needed
Onsite or remote
Provisioning or higher
for more information.
"DLP-D324 Install Alarm Cables on the MIC-A/P" task
Cisco ONS 15454 SDH Procedure Guide, R7.0

DLP- D207 Delete a Server Trail

for server trail
19-5