Figure 5-7 Sncp Dri Fiber Connection Example; Ntp- D217 Provision A Traditional Sncp Dual-Ring Interconnect - Cisco ONS 15454 SDH Procedure Manual

Hide thumbs Also See for ONS 15454 SDH:

Table of Contents

Turn Up a Network

The interconnect nodes must have fiber connections. An example is shown in

example shows an SNCP DRI with two rings, Nodes 1 to 4 and 5 to 8. In the example, an additional

STM-N is installed in Slot 13 at Node 4 and connected to an STM-N in Slot 6 at Node 6. Nodes 3

and 5 are interconnected with STM-N cards in Slot 6 (Node 3) and Slot 13 (Node 5).

Stop. You have completed this procedure.

SNCP DRI Fiber Connection Example

Cisco ONS 15454 SDH Procedure Guide, R7.0

Chapters

Table of Contents