Dlp- D148 Create Domain Icons - Cisco ONS 15454 SDH Procedure Manual

DLP- D148 Create Domain Icons

•
•
•
•
•
•
•
•
•
•
•
•
Step 7 Click OK.
Step 8 In the Save dialog box, enter a name in the File name field using one of the following formats:
•
•
•
Navigate to a directory where you want to store the file.
Step 9
Click OK.
Step 10
Repeat the task for each window that you want to export.
Step 11
Return to your originating procedure (NTP).
Step 12
DLP-D148 Create Domain Icons
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Domains created by one user are visible to all users who log into the network.
Note
To allow users of any security level to create local domains, that is, domains that are visible on the home
Note
CTC session only, superusers can change the CTC.network.LocalDomainCreationAndViewing NE
default value to TRUE. A TRUE value means any user can maintain the domain information in his or her
Cisco ONS 15454 SDH Procedure Guide, R7.0
18-40
Provisioning > SNMP window
Provisioning > Timing > General and BITS Facilities windows
Provisioning > OSI > Main Setup window
Provisioning > OSI > TARP > Config window
Provisioning > Cross-Connect window
Provisioning > WDM-ANS > Node Setup window
Maintenance > Cross-Connect > Cards window
Maintenance > Database window
Maintenance > Diagnostic window
Maintenance > Protection window
Maintenance > Timing > Source window
Maintenance > DWDM > ROADM Power Monitoring window
Filename.html for HTML files
Filename.csv for CSV files
Filename.tsv for TSV files
This task creates a domain, which is an icon that groups ONS 15454 SDH
icons in CTC network view.
None
DLP-D60 Log into CTC, page 17-49
As needed
Onsite or remote
Superuser
Chapter 18 DLPs D100 to D199
78-17194-01