Dlp- D132 Provision A Multirate Ppm On The Mrc-12 Card - Cisco ONS 15454 SDH Procedure Manual

Chapter 18 DLPs D100 to D199
DLP-D132 Provision a Multirate PPM on the MRC-12 Card
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, double-click the MRC-12 card where you want to provision PPM settings.
Step 1
Click the Provisioning > Pluggable Port Modules tabs.
Step 2
In the Pluggable Port Modules area, click Create. The Create PPM dialog box appears.
Step 3
In the Create PPM dialog box, complete the following:
Step 4
•
•
Click OK. The newly created port appears in the Pluggable Port Modules are. The row in the Pluggable
Step 5
Port Modules are turns light blue and the Actual Equipment Type column lists the equipment name.
Verify that the PPM appears in the list in the Pluggable Port Modules area. If it does not, repeat Steps
Step 6
through 5.
Repeat the task to provision a second PPM.
Step 7
Click OK.
Step 8
Continue with the
Step 9
to provision the line rate.
Return to your originating procedure (NTP).
Step 10
DLP-D133 Provision the Optical Line Rate on the MRC-12 Card
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, double-click the MRC-12 card where you want to provision PPM settings.
Step 1
Click the Provisioning > Pluggable Port Modules tabs.
Step 2
78-17194-01
This task provisions PPMs for the MRC-12 card. Single-rate SFPs do not
require provisioning.
None
DLP-D60 Log into CTC, page 17-49
As needed
Onsite or remote
Provisioning or higher
PPM—Choose the slot number where the SFP is installed from the drop-down list.
PPM Type—Choose the number of ports supported by your SFP from the drop-down list. If only one
port is supported, PPM (1 port) is the only option.
"DLP-D133 Provision the Optical Line Rate on the MRC-12 Card" task on page 18-27
This task provisions the optical line rate on a multirate PPM. Single-rate
SFPs do not require line rate provisioning.
None
DLP-D60 Log into CTC, page 17-49
As needed
Onsite or remote
Provisioning or higher

DLP- D132 Provision a Multirate PPM on the MRC-12 Card

Cisco ONS 15454 SDH Procedure Guide, R7.0
4
18-27