Ntp- D287 Modify And Delete Circuits - Cisco ONS 15454 SDH Procedure Manual

NTP- D287 Modify and Delete Circuits

NTP-D287 Modify and Delete Circuits
Purpose
Tools/Equipment
Prerequisite Procedures Circuits must exist on the network. See
Required/As Needed
Onsite/Remote
Security Level
Complete the
Step 1
want to modify. If you are already logged in, continue with Step 2.
As needed, complete the
Step 2
As needed, complete the
Step 3
As needed, complete the
Step 4
As needed, complete the
Step 5
As needed, complete the
Step 6
on page
As needed, complete the
Step 7
As needed, complete the
Step 8
As needed, complete the
Step 9
As needed, complete the
Step 10
Stop. You have completed this procedure.
NTP-D288 Modify and Delete Overhead Circuits and Server
Trails
Purpose
Tools/Equipment
Prerequisite Procedures Circuits must exist on the network. See
Required/As Needed
Onsite/Remote
Security Level
Caution Deleting circuits can be service affecting and should be performed during a maintenance window.
Cisco ONS 15454 SDH Procedure Guide, R7.0
7-4
This procedure edits or changes the properties of ONS 15454 SDH circuits
and deletes circuits.
None
Low-Order Tunnels."
As needed
Onsite or remote
Provisioning or higher
"DLP-D60 Log into CTC" task on page 17-49
"DLP-D230 Change a Circuit State" task on page
"DLP-D231 Edit a Circuit Name" task on page
"DLP-D232 Change Active and Standby Span Color" task on page
"DLP-D233 Edit SNCP Circuit Path Selectors" task on page
"DLP-D263 Edit SNCP Dual-Ring Interconnect Circuit Hold-Off Timer" task
19-67.
"DLP-D27 Delete Circuits" task on page
"DLP-D80 Change a VCAT Member Service State" task on page
"DLP-D76 Add a Member to a VCAT Circuit" task on page
"DLP-D77 Delete a Member from a VCAT Circuit" task on page
This procedure changes the tunnel type, repairs IP circuits, and deletes
overhead circuits and server trails.
None
Low-Order Tunnels."
As needed
Onsite or remote
Provisioning or higher
Chapter 7
Chapter 6, "Create Circuits and
at a node containing the circuit that you
19-26.
19-27.
19-29.
17-21.
17-67.
Chapter 6, "Create Circuits and
Manage Circuits
19-28.
17-72.
17-69.
78-17194-01