Dlp-B62 Add A Node To The Current Session Or Login Group; Figure 2-3 Login Node Group - Cisco ONS 15327 Procedure Manual

NTP-B23 Log into the ONS 15327 GUI
Figure 2-3
192.168.106.143
Node 2
Return to your originating procedure (NTP).
Step 6

DLP-B62 Add a Node to the Current Session or Login Group

Purpose
Tools
Prerequisite Procedures None
Required/As Needed
Onsite/Remote
Security Level
Log into an ONS 15327 on the network. See the
Step 1
instructions. If you are already logged in, go to Step 2.
From the CTC File menu, click Add Node (or click the Add Node button on the toolbar).
Step 2
In the Add Node dialog box, enter the node name (or IP address).
Step 3
If you want to add the node to the current login group, click Add Node to Current Login Group.
Step 4
Otherwise, leave it unchecked.
Note
Cisco ONS 15327 Procedure Guide, R4.0
2-26
Login Node Group
Laptop PC
IP Address
192.168.106.100
Node 1
IP Address
192.168.105.119
Three node ring
Node 3
This task adds a node to the current CTC session or login node group.
None
As needed
Onsite or remote
Provisioning or higher
The Add Node to Current Login Group check box is active only if you selected a login group
when you logged into CTC.
LAN/WAN (Ethernet)
Node 4
IP Address
192.168.104.109
Single
"DLP-B60 Log into CTC" task on page 2-23
Chapter 2 Connect the PC and Log into the GUI
Node 5
IP Address
Two node ring
Node 6
IP Address
192.168.103.199
for
March 2003