6A-50 ENGINE MECHANICAL
Press
DISASSEMBLY
1) Using piston ring expander, remove two compression rings (Top
and 2nd) and oil ring from piston.
2) Fit piston (1) and connecting rod assembly to special tool and
then press piston pin out of connecting rod by using hydraulic
press.
Special Tool
2. Front mark
3. Hole on
(A): 09910-38211
special tool
(A)-1. Base
(A)-2. Base cap
(A)-3. Driver handle
(A)-5. Guide
CLEANING
Clean carbon from piston head and ring grooves, using a suitable
tool.