6B-6 ENGINE COOLING
MATERIAL
Ethylene glycol base coolant
(Anti-freeze/Anti-corrosion coolant)
WATER PUMP
REMOVAL, INSPECTION AND INSTALLATION
For their procedures, refer to the same item of SECTION 6B in ser-
vice manual mentioned in FOREWORD of this manual; only for RE-
MOVAL and INSTALLATION of timing belt, belt tensioner and tim-
ing belt outside cover, refer to TIMING BELT AND TENSIONER of
Section 6A in this manual.
REQUIRED SERVICE MATERIAL
Engine cooling system for improving cooling efficiency and
for protection against rusting.
USE