6A-22 ENGINE MECHANICAL
10) Install water pump pulley (1) and drive belt.
Tightening Torque
.
(a): 11 N
m (1.1 kg-m, 8.0 lb-ft)
11) Install engine right mounting bracket (1) and engine right
mounting swing bracket (2).
Tightening Torque
.
(a): 55 N
m (5.5 kg-m, 40.0 lb-ft)
12) Remove support device.
13) Install A/C compressor bracket and A/C compressor, if
equipped.
14) Connect A/C suction and discharge hoses, if equipped.
15) Adjust drive belt tension, referring to "ENGINE COOLING" sec-
tion.
16) Adjust A/C compressor belt tension, if equipped.
Refer to Section 1B.
17) Evacuate and charge air conditioning system, refer to Section
1B.
18) Install right side of engine under cover.
19) Install suction pipe and air cleaner assembly, refer to INSTAL-
LATION of AIR CLEANER ASSEMBLY in this section.
20) Connect negative cable at battery.