Suzuki WagonR+ RB310 Service Manual page 1875

4) Remove air chamber case with air cleaner outlet hose.
5) Disconnect the following electric lead wires:
D ISC actuator (2)
D Ground wires from intake manifold
D Fuel injector (4)
D TP sensor (3)
D EFE heater (5)
1. Throttle body
6) Disconnect fuel return (4) and feed hoses (3) from fuel pipes.
7) Disconnect coolant hoses from intake manifold and throttle
body.
8) Remove EVAP surge tank with EVAP canister purge valve.
1. Throttle body
2. ISC actuator
5. Clamp
9) Disconnect the following vacuum hoses.
D Pressure sensor hose from intake manifold.
D Brake booster hose from intake manifold.
10) Disconnect breather hose from PCV valve.
11) Disconnect accelerator cable from throttle body.
12) Disconnect other connected to throttle body and intake man-
ifold, if any.
13) Remove intake manifold with throttle body from cylinder head.
14) Remove throttle body from intake manifold.
ENGINE MECHANICAL 6A-13