Suzuki WagonR+ RB310 Service Manual page 1897

D Indicates position from timing belt
side. Install in numerical order
starting from timing belt side.
D Indicates direction of housing.
Install so that arrow is directed
toward timing belt side.
INSTALLATION
1) Before installing valve lash adjuster to cylinder head, fill oil pas-
sage of cylinder head (1) with engine oil according to the follow-
ing procedure.
Pour engine oil through camshaft journal oil holes (2) and check
that oil comes out from oil holes in sliding part of valve lash ad-
juster.
2) Install lash adjuster to cylinder head.
Apply engine oil around valve lash adjuster and then install it to
cylinder head.
3) Install camshaft to cylinder head.
After applying engine oil to camshaft journal and all around cam,
set camshaft to cylinder head so that camshaft timing belt pulley
pin hole (1) in camshaft is at lower position.
4) Install camshaft housing to camshaft and cylinder head.
D Apply engine oil to sliding surface of each housing against
camshaft journal.
D Apply sealant to mating surface of No.1 and No.3 housings
which will mate with cylinder head.
"A": Sealant 99000-31110
D Embossed marks are provided on each camshaft housing, in-
dicating position and direction for installation.
Install housing as indicated by these marks.
ENGINE MECHANICAL 6A-35