Suzuki WagonR+ RB310 Service Manual page 1962

NOTE:
Before starting engine, place transmission gear shift lever in
"Neutral" (shift selector lever to "P" range for A/T model), and
set parking brake and block drive wheels.
1) Warm up engine to normal operating temperature.
2) Set tachometer.
3) Check idle speed with A/C OFF.
If idle speed is not within specified range, check idle speed con-
trol system and any other system and parts which might affect
idle speed. Refer to "Engine Diagnosis of Section 6-1" for in-
spection.
Engine idle speed: 800 " 50 r/min
NOTE:
Idle speed is not adjustable manually. If it is out of its speci-
fied range, there is a faulty condition somewhere. Check
each of related systems and parts.
AIR AND FUEL DELIVERY SYSTEM
FUEL PRESSURE
INSPECTION
1) Relieve fuel pressure, referring to Section 6-1.
2) Separate air chamber case from throttle body and shift its posi-
tion.
3) Disconnect fuel feed hose from throttle body.
CAUTION:
A small amount of fuel may be released after fuel line is
disconnected.
In order to reduce chance of personal injury, cover fitting
to be disconnected with a shop cloth. Place that cloth in
an approved container when disconnection is com-
pleted.
4) Connect special tools and hose between throttle body and fuel
feed pipe as shown in figure, and clamp hoses securely to en-
sure no leaks occur during checking.
Special Tool
(A): 09912-58441
(B): 09912-58431
(C): 09912-58490
5) Install air chamber case to throttle body and cylinder head cover.
1. Throttle body
2. Fuel feed hose
ENGINE AND EMISSION CONTROL SYSTEM 6E1-9