Suzuki WagonR+ RB310 Service Manual page 1901

6) Disconnect following electric wires:
D MAP sensor
D CMP sensor
D Engine oil pressure switch
D ECT sensor
D Ground wire from intake manifold
D Injector
D TP sensor
D ISC actuator
D Oxygen sensor No. 1
D EVAP canister purge valve
D Center high-tension cord from distributor
D EFE heater
and then release above wire harnesses from clamps.
7) Disconnect following hoses:
D Canister purge hose from EVAP canister purge valve
D Radiator inlet hose from thermostat case
D Brake booster hose from intake manifold
D Heater inlet hose from intake manifold
D Throttle body outlet hose from throttle body
8) Disconnect accelerator cable from throttle body.
9) Disconnect fuel feed hose (1) and fuel return hose (2) from fuel
pipes.
10) Disconnect water inlet pipe (1) from its bracket.
11) Remove cylinder head cover as previously outlined.
ENGINE MECHANICAL 6A-39