Renault Laguna III Manual page 3661

FRONT SEAT FRAMES AND MECHANISMS
Front seat lumbar adjustment: Removal - Refitting
REFITTING
I - REFITTING PREPARATIONS OPERATION
a Always replace the front seat lumbar adjustment
mechanism rivets.
II - REFITTING OPERATION FOR PART
CONCERNED
a Refit:
- the front seat lumbar adjustment mechanism.
- new rivets (4) .
a Clip on the cable (3) .
a Carry out a function test.
III - FINAL OPERATION.
a Refit:
- the lumbar support,
- the front seatback trim (see 77A, Front seat trim,
Front seatback trim: Removal - Refitting, page
77A-3) ,
- the entire front seat (see 75A, Front seat frames
and mechanisms, Complete front seat: Remo-
val - Refitting, page 75A-15) .
a Connect the battery (see Battery : Removal - Refit-
ting) (MR 415, 80A, Battery).
75A-9
75A