Specifying User Settings; System Settings - Konica Minolta bizhub C451 User Manual

Utility mode
11.3

Specifying user settings

This section describes the function and main registration parameters that
can be specified after pressing the [Utility/Counter] key, then touching [User
Settings].

System Settings

Language Selection
Description
Select the language of the touch panel messages.
Measurement Unit Settings
Description
Select one of the following as the measurement units in which values
are displayed in the touch panel.
mm (Numerical Value), inch (Numerical Value), inch (Fraction)
Paper Tray Settings
Parameter
Auto Tray Selec-
tion Settings
Auto Tray Switch
ON/OFF
No Matching Pa-
per in Tray Setting
Print Lists
C451
Description
Select the paper trays that are selected automat-
ically when the "Auto" Paper setting is specified.
In addition, specify the priority of the paper trays
when the auto tray switch operation is performed.
Select whether or not a paper tray loaded with pa-
per of the same size is selected automatically
when a paper tray that was selected manually be-
comes empty while printing copies.
Select the operation that is performed when there
is no paper of the corresponding size in the spec-
ified paper tray.
• Stop Printing (Tray Fixed):
The machine stops operating.
• Switch Trays (Tray Priority):
Whether or not the specified paper tray
contains paper of the corresponding size is
determined and, if it does not, a different paper
tray is selected if it contains paper of the
corresponding size.
Select the paper tray used for printing lists, such
as the sales counter and consumables indicators.
11
Default Setting
English
Default Setting
mm (Numerical Value)
Default Setting
Tray priority order:
Tray 1 → Tray 2 → Tray
3 → Tray 4 → LCT*
*Appears only when
the LCT is installed.
Restrict
Stop Printing (Tray
Fixed)
Tray1, 1-Sided
11-20