Ph Unit - Konica Minolta MagiColor 1600W Service Manual

Field Service Ver. 1.0 Nov. 2008
6.3.11

PH unit

• Do not replace the printer head unit while the power is ON.
Laser beam generated during the above mentioned activity may cause
blindness.
• Do not disassemble or adjust the printer head unit.
Laser beam generated during the above mentioned activity may cause
blindness.
1. Remove the imaging cartridge.
See P.13
2. Remove the rear cover.
See P.21
3. Remove the right cover.
See P.22
4. Remove the left cover.
See P.21
5. Remove the control panel.
See P.22
6. Remove the high voltage unit.
See P.28
[1]
CAUTION
[1]
A034F2C500DA
[2]
A034F2C501DA
7. Disconnect the flat cable [1] on the
MFP board.
NOTE
• For magicolor 1600W: P108
• For magicolor 1650EN: CN5
8. Disconnect the connector (PJ19) [1]
and flat cable (PJ18) [2] on the
printer control board.
6. Other
31