Ph Unit - Konica Minolta magicolor 1680MF Service Manual

7. Other
7.3.15

PH unit

• Do not replace the printer head unit while the power is ON.
Laser beam generated during the above mentioned activity may cause
blindness.
• Do not disassemble or adjust the printer head unit.
Laser beam generated during the above mentioned activity may cause
blindness.
1. Remove the imaging cartridge.
See P.10
2. Remove the rear cover.
See P.31
3. Remove the right cover.
See P.32
4. Remove the left cover.
See P.31
5. Remove the operation panel.
See P.33
6. Remove the high voltage unit.
See P.43
[1]
[1]
46
CAUTION
A034F2C088DA
[2]
A034F2C501DA
Field Service Ver. 1.0 Nov. 2008
7. Disconnect the flat cable (P8) [1] on
the MFP board.
NOTE
• The left picture shows magicolor
1690MF.
8. Disconnect the connector (PJ19) [1]
and flat cable (PJ18) [2] on the
printer control board.