Ph Unit - Konica Minolta d-Color MF3000 PF-P08 Service Manual

Field Service Ver. 1.0 May 2010
7.4.18

PH Unit

• Do not replace the printer head unit while the power is ON.
Laser beam generated during the above mentioned activity may cause
blindness.
• Do not disassemble or adjust the printer head unit.
Laser beam generated during the above mentioned activity may cause
blindness.
1. Remove the toner cartridge (C, M, Y, K).
See P.8
2. Remove the waste toner bottle.
See P.14
3. Remove the imaging unit (C, M, Y, K).
See P.11
4. Remove the fuser unit.
See P.20
5. Remove the rear cover.
See P.44
6. Remove the left cover.
See P.45
7. Remove the hard disk.
See P.55
8. Remove the MFP board.
See P.58
9. Remove the printer control board.
See P.62
[1]
CAUTION
10. Remove two screws [1], and remove
[2]
NOTE
• Remove the wire saddle [3].
[3]
A121F2C035DA
7. OTHER MAINTENANCE ITEM
the shield sheet metal [2].
67