Table of Contents
Advertisement
Chapter 4: Server configuration
Set Modem Interface
l
Update System
l
Use your pre-installation planning forms to enter information on these pages. For more
information on these pages, see
at the bottom of each page.
6. When you complete all the fields, click Continue on the Update System page. The Update
System page displays each configuration task as it completes it and the system displays
following message:
System modifications completed.
Avaya Installation Wizard
About the Avaya Installation Wizard
Use the Avaya Installation Wizard to:
Set the date, the time, and the time zone
l
Configure the server
l
Install the RFA license file
l
Note:
To install the license file the server does not have to be connected to the
Note:
reference IPSI. However, you have only 30 minutes before the system checks the
serial number on the IPSI. To add another 30 minutes, type reset system 1
and press Enter in a SAT session to restart the Communication Manager
software.
Install the Avaya authentication files
l
Install software updates
l
Set the product ID
l
Set the alarming
l
The Avaya Installation Wizard cannot be used to configure:
Extra Large (XL) or Standard Memory Configuration (S8720 only)
l
Note:
To configure XL or Standard Memory, use the Configure Server in the System
Note:
Management Interface. For more information see,
S8720 Server
Encryption setting for Software Duplication (S8720 or S8730 with Software Duplication)
l
46 Installing and Configuring the Avaya S8500-Series Server
Configuring the server manually
on page 49.
on page 42 or click Help
Configuring memory for an
Advertisement
Table of Contents
Troubleshooting
