Using The Installation Wizard; Verifying Rmb Ip Information - Avaya S8500 Installing And Configuring

Chapter 4: Media server configuration

Using the Installation Wizard

Use the Avaya Installation Wizard (IW) to automatically:
Configure the media server
●
Configure the Remote Maintenance Board
●
Install the license file
●
Note:
You can install the license file without being physically connected to the reference
Note:
IPSI. However, you have only 30 minutes before it checks the serial number on
the IPSI. To get another 30 minutes, you can restart the clock by restarting the
media server. In a SAT session, type reset system 1.
Install the Avaya authentication files
●
Install software updates
●
You can use the IW in two ways:
You can import the data from the filled-out Electronic Preinstallation Worksheet (EPW).
●
When the IW prompts to import the Preinstallation Worksheet, click Import EPW and
browse to the location of the EPW file on your laptop. The IW will open the EPW and
upload the configuration data.
You can type in the information manually using the filled-out EPW as a guide. The IW will
●
prompt you to enter the configuration data for each step in the Configure Server section.
To run the Avaya Installation Wizard:
1. Launch the Web browser.
2. Enter 192.11.13.6 and press Enter to bring up the login Web page.
3. Log in as craft and use the initial craft password.
4. Click Launch Avaya Installation Wizard.
5. Follow the Wizard prompts, using Help on each page for more information.

Verifying RMB IP information

The Remote Maintenance Board (RMB) page is under Optional Services in the Wizard
configuration process. Verify that the IP information was retrieved from the EPW. If the
information is not there, manually complete all fields.
46
Installing and Configuring the Avaya S8500 Media Server February 2006