Install The Communication Manager License And Authentication Files; Reboot The Server - Avaya S8300 Series Replacement Manual

Job Aid: S8300 Communication Manager and co-resident SES: Replacing the S8300C or S8300D Server or
Install the Communication Manager license and
authentication files
!
CAUTION:
If the Communication Manager/SES software release was 5.x on the server that
CAUTION:
you replaced, use the following procedure to install only the authentication file. If
the Communication Manager/SES software release was pre 5.x on the server
that you replaced, use the following procedure to install the Communication
Manager license and authentication files.
To install the Communication Manager license and authentication files:
1. On the Server (Maintenance) Web page, select Security > License File.
The system displays the License File screen.
2. Select Install the license file I previously downloaded (radio button) and click Submit.
The system displays a message telling you that the license was installed successfully.
3. Select Security > Authentication File.
The system displays the Authentication File screen.
4. Select Install the Authentication file I previously downloaded (radio button) and click
Install.
The system displays a message telling you that the authentication file was installed
successfully.
5. Verify the license and authentication file installation by issuing the statuslicense -v
command from the server command line:
The License Mode should be Normal.
●
The report should list a License Serial Number.
●

Reboot the server

To instate the foregoing administration and provisioning:
1. On the Server (Maintenance) Web page select Server > Shutdown server.
The system displays the Shutdown This Server screen.
2. Select Delayed Shutdown and check the Restart server after shutdown box.
3. Click Shutdown.
34 Job Aids for Field Replacements (FRUs) for the Avaya S8300 Server with the G700 Media Gateway