Table of Contents
Advertisement
Job Aid: Replacing the Avaya S8510 server
a. Log in with telnet or ssh.
b. At the Linux command line, type filesync -a <IP_address_of_LSP>, where
<IP_address_of_LSP> is the IP address of the LSP you are upgrading.
Install the Communication Manager license and authentication
files
Note:
If you restored the operating system (.os file) and security (.security) files earlier,
Note:
omit this section and continue with
!
CAUTION:
If the Communication Manager software version matches the translation's
CAUTION:
version, use the following procedure to install the Communication Manager
license and authentication file. If they do not match, install the license and
authentication files manually.
!
CAUTION:
A super-user login, dadmin, or other customer super-user login must exist before
CAUTION:
you install an authentication file. See
To install the Communication Manager license and authentication files:
1. At the Maintenance Web Pages select Security > License File.
The License File page displays.
2. Select Install the license file I previously downloaded (radio button) and click Submit.
The system displays a message telling you that the license was installed successfully.
3. At the Maintenance Web Pages select Security > Authentication File.
The Authentication File page displays.
4. Select Install the Authentication file I previously downloaded (radio button) and click
Install.
The system displays a message telling you that the authentication file was installed
successfully.
5. Verify the license and authentication file installation by issuing the statuslicense -v
command from the server command line:
The License Mode should be Normal.
•
The report should list a License Serial Number.
•
28 Job Aids for Field Replacements (FRUs) for the Avaya S8510 Server
Reboot the server
on page 29.
Create a super-user login
on page 27.
Advertisement
Table of Contents
