Chapter 75 Trace Route Command List - D-Link DGS-1510/ME Series Reference Manual

Chapter 75 Trace Route Command List

traceroute <ipaddr> {ttl <value 1-60>} {port <value 30000-64900>} {timeout <sec 1-65535>} {probe <value 1-9>}
traceroute6 <ipv6addr> {ttl <value 1-60> | port <value 30000-64900> | timeout <sec 1-65535> | probe <value 1-
9>}
75-1 traceroute
Description
This command is used to trace the routed path between the Switch and a destination end station.
Format
traceroute <ipaddr> {ttl <value 1-60> | port <value 30000-64900> | timeout <sec 1-65535> | probe <value 1-
9>}
Parameters
<ipaddr> - Enter the IP address of the destination end station.
ttl - (Optional) Specifies the time to live value of the trace route request. This is the maximum number of routers
that a trace route packet can pass. The traceroute command will cross while seeking the network path
between two devices. The range for the TTL is 1 to 60 hops.
<value 1-60> - Enter the time to live value here. This value must be between 1 and 60.
port - (Optional) Specifies the port number. The value range is from 30000 to 64900.
<value 30000-64900> - Enter the port number here. This value must be between 30000 and 64900.
timeout - (Optional) Specifies the timeout period while waiting for a response from the remote device. A value of
1 to 65535 seconds can be specified. The default is 5 seconds.
<sec 1-65535> - Enter the timeout period value here. This value must be between 1 and 65535 seconds.
probe - (Optional) Specifies the number of probing. The range is from 1 to 9. If unspecified, the default value is 1.
<value 1-9> - Enter the probing number value here. This value must be between 1 and 9.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
Trace the routed path between the Switch and 10.48.74.121:
DGS-1510-28XMP/ME:admin# traceroute 10.48.74.121 probe 3
Command: traceroute 10.48.74.121 probe 3
1 <10 ms.
2 <10 ms.
3 <10 ms.
Trace complete.
DGS-1510-28XMP/ME:admin#
DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
10.12.73.254
10.19.68.1
10.48.74.121
608