D-Link DGS-1510/ME Series Reference Manual page 423

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
Parameters
vlan_name 32> -Enter the multicast VLAN name here. The VLAN name can be up to 32 characters long.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete an IGMP snooping multicast VLAN called "v1":
DGS-1510-28XMP/ME:admin# delete igmp_snooping multicast_vlan v1
Command: delete igmp_snooping multicat_vlan v1
Success.
DGS-1510-28XMP/ME:admin#
48-10 enable igmp_snooping multicast_vlan
Description
This command is used to control the status of the multicast VLAN function.
Format
enable igmp_snooping multicast_vlan
Parameters
None.
Restrictions
Only Administrators can issue this command.
Example
To enable the IGMP snooping multicast VLAN function globally:
DGS-1510-28XMP/ME:admin# enable igmp_snooping multicast_vlan
Command: enable igmp_snooping multicast_vlan
Success.
DGS-1510-28XMP/ME:admin#
48-11 disable igmp_snooping multicast_vlan
Description
This command is used to disable the IGMP multicast VLAN function. The command disable igmp_snooping is used
to disable the ordinary IGMP snooping function. By default, the multicast VLAN is disabled.
419