D-Link DGS-1510/ME Series Reference Manual page 524

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
Example
To configure user authentication method:
DGS-1510-28XMP/ME:admin# config ssh authmode publickey enable
Command: config ssh authmode publickey enable
Success.
DGS-1510-28XMP/ME:admin#
63-4 show ssh authmode
Description
This command is used to show the user authentication method.
Format
show ssh authmode
Parameters
None.
Restrictions
None.
Example
To show user authentication method:
DGS-1510-28XMP/ME:admin# show ssh authmode
Command: show ssh authmode
The SSH Authentication Method:
Password : Enabled
Public Key : Enabled
Host-based : Enabled
DGS-1510-28XMP/ME:admin#
63-5 config ssh user
Description
This command is used to update user information for SSH configuration.
Format
config ssh user <username 15> authmode [hostbased [hostname <domain_name 32> | hostname_IP
<domain_name 32> <ipaddr>] | password | publickey]
520