D-Link DGS-1510/ME Series Reference Manual page 317

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure LACP mode on port 1-12:
DGS-1510-28XMP/ME:admin# config lacp_port 1-12 mode active
command: config lacp_port 1-12 mode active
Success.
DGS-1510-28XMP/ME:admin#
37-7 show lacp_port
Description
This command is used to display the current mode of LACP of the ports.
Format
show lacp_port {<portlist>}
Parameters
<portlist> - (Optional) Enter the list of ports used for this configuration here.
If no parameter is specified, the system will display current LACP and all port status.
Restrictions
None.
Example
To show the LACP mode of the ports:
313