D-Link DGS-1510/ME Series Reference Manual page 424

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
Format
disable igmp_snooping multicast_vlan
Parameters
None.
Restrictions
Only Administrators can issue this command.
Example
To disable the IGMP snooping multicast VLAN function:
DGS-1510-28XMP/ME:admin# disable igmp_snooping multicast_vlan
Command: disable igmp_snooping multicast_vlan
Success.
DGS-1510-28XMP/ME:admin#
48-12 config igmp_snooping multicast_vlan forward_unmatched
Description
This command is used to configure the forwarding mode for multicast VLAN unmatched packets. When the Switch
receives an IGMP snooping packet, it will match the packet against the multicast profile to determine which
multicast VLAN to associate with. If the packet does not match all profiles, the packet will be forwarded or dropped
based on this setting.
By default, the packet will be dropped.
Format
config igmp_snooping multicast_vlan forward_unmatched [enable | disable]
Parameters
enable - Specifies that the packet will be flooded on the VLAN.
disable - Specifies that the packet will be dropped.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure the forwarding mode for multicast VLAN unmatched packets：
420