D-Link DGS-1510/ME Series Reference Manual page 367

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
Example
To show the MAC-based Access Control port configuration for ports 1 to 4:
DGS-1510-28XMP/ME:admin# show mac_based_access_control ports 1-4
Command: show mac_based_access_control ports 1-4
Port State
----- --------
1 Disabled
2 Disabled
3 Disabled
4 Disabled
DGS-1510-28XMP/ME:admin#
42-15 show mac_based_access_control_local
Description
This command is used to display the MAC-based Access Control local database entry(s).
Format
show mac_based_access_control_local {[mac <macaddr> | vlan <vlan_name 32> | vlanid <vlanid 1-4094>]}
Parameters
mac - (Optional) Specifies to display MAC-based Access Control local database entries for a specific MAC
address.
<macaddr> - Enter the MAC address used here.
vlan - (Optional) Specifies to display MAC-based Access Control local database entries for a specific target VLAN
name.
<vlan_name 32> - Enter the VLAN name here. This name can be up to 32 characters long.
vlanid - (Optional) Specifies to display MAC-based Access Control local database entries for a specific target
VLAN ID.
<vlanid 1-4094> - Enter the VLAN ID here. This value must be between 1 and 4094.
If no parameter is specified, all of the MAC-based Access Control local database entries will be displayed.
Restrictions
None.
Example
To show MAC-based Access Control local database for the VLAN called 'default':
Aging Time Block Time
(min) (sec)
---------- ---------
1440 300
1440 300
1440 300
1440 300
Auth Mode Max User
---------- --------
Host-based 128
Host-based 128
Host-based 128
Host-based 128
363