Chapter 33 Ipv6 Neighbor Discover Command List - D-Link DGS-1510/ME Series Reference Manual

Chapter 33 IPv6 Neighbor Discover Command
create ipv6 neighbor_cache ipif <ipif_name 12> <ipv6addr> <macaddr>
delete ipv6 neighbor_cache ipif [<ipif_name 12> | all] [<ipv6addr> | static | dynamic | all]
show ipv6 neighbor_cache ipif [<ipif_name 12> | all] [ipv6address <ipv6addr> | static | dynamic | all]
config ipv6 nd ns ipif <ipif_name 12> retrans_time <millisecond 0-4294967295>
show ipv6 nd {ipif <ipif_name 12>}
33-1 create ipv6 neighbor_cache ipif
Description
This command is used to add a static neighbor on an IPv6 interface.
Format
create ipv6 neighbor_cache ipif <ipif_name 12> <ipv6addr> <macaddr>
Parameters
<ipif_name 12> - Enter the IP interface name here. This name can be up to 12 characters long.
<ipv6addr> - Enter the address of the neighbor.
<macaddr> - Enter the MAC address of the neighbor.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
Create a static neighbor cache entry:
DGS-1510-28XMP/ME:admin# create ipv6 neighbor_cache ipif System 3ffc::1
Command: create ipv6 neighbor_cache ipif System 3ffc::1
Success.
DGS-1510-28XMP/ME:admin#
33-2 delete ipv6 neighbor_cache ipif
Description
This command is used to delete a neighbor cache entry or static neighbor cache entries from the address cache or
all address cache entries on this IP interface. Both static and dynamic entries can be deleted.
DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
List
00-01-02-03-04-05
295
00-01-02-03-04-05