D-Link DGS-1510/ME Series Reference Manual page 325

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
DGS-1510-28XMP/ME:admin# config lldp ports all basic_tlvs system_name enable
Command: config lldp ports all basic_tlvs system_name enable
Success.
DGS-1510-28XMP/ME:admin#
To configure exclude the vlan nameTLV from the outbound LLDP advertisements for all ports:
DGS-1510-28XMP/ME:admin# config lldp ports all dot1_tlv_pvid enable
Command: config lldp ports all dot1_tlv_pvid enable
Success.
DGS-1510-28XMP/ME:admin#
To configure exclude the port and protocol VLAN ID TLV from the outbound LLDP advertisements for all ports:
DGS-1510-28XMP/ME:admin# config lldp ports all dot1_tlv_protocol_vid vlanid 1-3 enable
Command: config lldp ports all dot1_tlv_protocol_vid vlanid 1-3 enable
Success.
DGS-1510-28XMP/ME:admin#
To configure exclude the VLAN name TLV from the outbound LLDP advertisements for all ports:
DGS-1510-28XMP/ME:admin# config lldp ports all dot1_tlv_vlan_name vlanid 1-3 enable
Command: config lldp ports all dot1_tlv_vlan_name vlanid 1-3 enable
Success.
DGS-1510-28XMP/ME:admin#
To configure exclude the protocol identity TLV from the outbound LLDP advertisements for all ports:
DGS-1510-28XMP/ME:admin# config lldp ports all dot1_tlv_protocol_identity all enable
Command: config lldp ports all dot1_tlv_protocol_identity all enable
Success.
DGS-1510-28XMP/ME:admin#
To configure exclude the MAC/PHY configuration/status TLV from the outbound LLDP advertisements for all ports:
DGS-1510-28XMP/ME:admin# config lldp ports all dot3_tlvs mac_phy_configuration_status enable
Command: config lldp ports all dot3_tlvs mac_phy_configuration_status enable
Success.
DGS-1510-28XMP/ME:admin#
321