Chapter 2 Basic Command List - D-Link DGS-1510/ME Series Reference Manual

Chapter 2
show session
show serial_port
config serial_port {baud_rate [9600 | 19200 | 38400 | 115200] | auto_logout [never | 2_minutes | 5_minutes |
10_minutes | 15_minutes]}
enable clipaging
disable clipaging
login
logout
?
clear
show command_history
config command_history <value 1-40>
config greeting_message {default}
show greeting_message
config command_prompt [<string 16> | username | default]
config terminal width [default | <value 80-200>]
show terminal width
config ports [<portlist> | all] {medium_type [fiber | copper]} {speed [auto | 10_half | 10_full | 100_half | 100_full |
1000_full {[master | slave]} | 10g_full] | flow_control [enable | disable] | learning [enable | disable] | state
[enable | disable] | mdix [auto | normal | cross] | [description <desc 1-32> | clear_description]}
show ports {<portlist>} {[description | err_disabled | details | media_type]}
2-1 show session
Description
This command is used to display a list of currently users which are login to the Switch.
Format
show session
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To display the session entries:
DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
Basic Command List
8