D-Link DGS-1510/ME Series Reference Manual page 431

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
Parameters
<value 1-7> - Enter the MSTP instance ID here. This value must be between 1 and 7.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete an MSTP instance:
DGS-1510-28XMP/ME:admin# delete stp instance_id 2
Command: delete stp instance_id 2
Success.
DGS-1510-28XMP/ME:admin#
49-8 config stp mst_config_id
Description
This command is used to change the name or the revision level of the MST configuration identification.
Format
config stp mst_config_id {revision_level <int 0-65535> | name <string>}
Parameters
revision_level - (Optional) Specifies the same given name with different revision level also represents different
MST regions.
<int 0-65535> - Enter the revision level here. This value must be between 0 and 65535.
name - (Optional) Specifies the name given for a specific MST region.
<string> - Enter the MST region name here.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To change the name and revision level of the MST configuration identification:
DGS-1510-28XMP/ME:admin# config stp mst_config_id name R&D_BlockG revision_level 1
Commands: config stp mst_config_id name R&D_BlockG revision_level 1
Success.
DGS-1510-28XMP/ME:admin#
427