D-Link DGS-1510/ME Series Reference Manual page 559

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
Parameters
<sw_location> - (Optional) Enter the system location string with a maximum of 128 characters here.
Restrictions
Only Administrators and Operators can issue this command.
Example
To configure the Switch location for "HQ 5F":
DGS-1510-28XMP/ME:admin# config snmp system_location HQ 5F
Command: config snmp system_location HQ 5F
Success.
DGS-1510-28XMP/ME:admin#
67-22 config snmp system_contact
Description
This command is used to enter the name of a contact person who is responsible for the Switch.
Format
config snmp system_contact {<sw_contact>}
Parameters
<sw_contact> - (Optional) Enter the system contact string with a maximum of 128 characters here.
Restrictions
Only Administrators and Operators can issue this command.
Example
To configure the Switch contact to "MIS Department II":
DGS-1510-28XMP/ME:admin# config snmp system_contact "MIS Department II"
Command: config snmp system_contact "MIS Department II"
Success.
DGS-1510-28XMP/ME:admin#
67-23 enable snmp traps
Description
This command is used to enable SNMP trap support.
555