D-Link DGS-1510/ME Series Reference Manual page 411

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure the maximum number of multicast group that ports 1 and 3 can join to 100:
DGS-1510-28XMP/ME:admin# config max_mcast_group ports 1, 3 max_group 100
Command: config max_mcast_group ports 1, 3 max_group 100
Success.
DGS-1510-28XMP/ME:admin#
47-8 show max_mcast_group
Description
This command is used to display the maximum number of multicast groups that a port can join. If the IPv4 or IPv6
option is not specified, IPv4 is implied.
Format
show max_mcast_group [ports <portlist> | vlanid <vlanid_list>] {[ipv4 | ipv6]}
Parameters
ports - Specifies the range of ports for displaying information about the maximum number of multicast groups that
the specified ports can join.
<portlist> - Enter the list of ports to be configured here.
vlanid - Specifies the VLAN ID for displaying the maximum number of multicast groups.
<vlanid_list> - Enter the VLAN ID list here.
ipv4 - (Optional) Specifies to display the maximum number of IPv4 learned addresses.
ipv6 - (Optional) Specifies to display the maximum number of IPv6 learned addresses.
Restrictions
None.
Example
To display the maximum number of multicast groups that ports 1 and 2 can join:
407