D-Link DGS-1510/ME Series Reference Manual page 120

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
10-20 disable ipif_ipv6_link_local_auto
Description
This command is used to disable the auto configuration of link local address when no IPv6 address are configured.
Format
disable ipif_ipv6_link_local_auto [<ipif_name 12> | all]
Parameters
<ipif_name 12> - Enter the IP interface name used here. This name can be up to 12 characters long.
all - Specifies that all the IP interfaces will be used.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable the IP interface for IPv6 link local automatic:
DGS-1510-28XMP/ME:admin# disable ipif_ipv6_link_local_auto newone
Command: disable ipif_ipv6_link_local_auto newone
Success.
DGS-1510-28XMP/ME:admin#
10-21 show ipif_ipv6_link_local_auto
Description
This command is used to display the link local address automatic configuration state.
Format
show ipif_ipv6_link_local_auto {<ipif_name 12>}
Parameters
<ipif_name 12> - (Optional) Enter the IP interface name used here. This name can be up to 12 characters long.
Restrictions
None.
Example
To display the link local address automatic configuration state.
116