D-Link DGS-1510/ME Series Reference Manual page 152

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
Example
To show the CFM ports:
DGS-1510-28XMP/ME:admin# show cfm ports 3-6
Command: show cfm ports 3-6
Port State
----- --------
3 Enabled
4 Enabled
5 Enabled
6 Disabled
DGS-1510-28XMP/ME:admin#
16-14 show cfm
Description
This command is used to show the CFM configuration.
Format
show cfm {[md [<string 22> | md_index <uint 1-4294967295>] {ma [<string 22> | ma_index <uint 1-
4294967295>] {mepid <int 1-8191>}} | mepname <string 32>]}
Parameters
md - (Optional) Specifies the maintenance domain name.
<string 22> - Enter the maintenance domain name used here. This name can be up to 22 characters long.
md_index - Specifies the maintenance domain index.
<uint 1-4294967295> - Enter the maintenance domain index value here. This value must be between 1
and 4294967295.
ma - (Optional) Specifies the maintenance association name.
<string 22> - Enter the maintenance association name used here. This name can be up to 22 characters
long.
ma_index - Specifies the maintenance association index.
<uint 1-4294967295> - Enter the maintenance association index value here. This value must be
between 1 and 4294967295.
mepid - (Optional) Specifies the MEP ID.
<int 1-8191> - Enter the MEP ID used here. This value must be between 1 and 8191.
mepname - (Optional) Specifies the MEP name.
<string 32> - Enter the MEP name used here. This name can be up to 32 characters long.
Restrictions
None.
Example
To show the CFM configuration:
148