D-Link DGS-1510/ME Series Reference Manual page 272

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
31-17 show igmp_snooping rate_limit
Description
This command is used to display the IGMP snooping rate limit setting.
Format
show igmp_snooping rate_limit [ports <portlist> | vlanid <vlanid_list>]
Parameters
ports - Specifies the port range.
<portlist> - Enter the range of ports here.
vlanid - Specifies the VLAN range..
<vlanid_list> - Enter the VLAN ID list here.
Restrictions
None.
Example
To display the IGMP snooping rate limit for ports 1 to 15:
DGS-1510-28XMP/ME:admin# show igmp_snooping rate_limit ports 1-15
Command: show igmp_snooping rate_limit ports 1-15
Port Rate Limit
-------- -----------
1 No Limit
2 100
3 No Limit
4 No Limit
5 No Limit
Total Entries: 5
31-18 show igmp_snooping group
Description
This command is used to display the current IGMP snooping group configuration on the Switch.
Format
show igmp_snooping group {[vlan <vlan_name 32> | vlanid <vlanid_list> | ports <portlist>] {<ipaddr>}}
{data_driven}
Parameters
vlan - (Optional) Specifies the name of the VLAN for which you want to view IGMP snooping group information. If
VLAN, ports and IP address are not specified, the system will display all current IGMP snooping group
268