D-Link DGS-1510/ME Series Reference Manual page 241

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
DGS-1510-28XMP/ME:admin# show multicast_fdb
Command: show multicast_fdb
VLAN Name : default
MAC Address : 01-00-5E-00-00-00
Egress Ports : 1-5
Mode : Static
Total Entries: 1
DGS-1510-28XMP/ME:admin#
28-10 show fdb
Description
This command is used to display the current unicast MAC address forwarding database.
Format
show fdb {port <port> | [vlan <vlan_name 32> | vlanid <vidlist>] | mac_address <macaddr> | static |
aging_time | security}
Parameters
port - (Optional) Specifies to display the entries for a specified port.
<port> - Enter the port number here.
vlan - (Optional) Specifies to display the entries for a specific VLAN. The maximum name length is 32.
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters long.
vlanid - (Optional) Specifies to display the entries for the VLANs indicated by VID list.
<vidlist> - Enter the VLAN ID list here.
mac_address - (Optional) Specifies to display a specific MAC address.
<macaddr> - Enter the MAC address here.
static - (Optional) Specifies to display all permanent entries.
aging_time - (Optional) Specifies to display the unicast MAC address aging time.
security - (Optional) Specifies to display the FDB entries that are created by the security module.
If no parameter is specified, system will display the unicast address table.
Restrictions
None.
Example
To display the FDB table:
237