D-Link DGS-1510/ME Series Reference Manual page 71

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
Restrictions
Only Administrators can issue this command.
Example
To configure a TACACS+ authentication server host's key value:
DGS-1510-28XMP/ME:admin# config authen server_host 10.1.1.222 protocol tacacs+ key "This is a
secret."
Command: config authen server_host 10.1.1.222 protocol tacacs+ key "This is a secret."
Success.
DGS-1510-28XMP/ME:admin#
5-22 delete authen server_host
Description
This command is used to delete an authentication server host.
Format
delete authen server_host <ipaddr> protocol [tacacs | xtacacs | tacacs+ | radius]
Parameters
<ipaddr> - Enter the server host's IP address.
protocol - Specifies the host's authentication protocol.
tacacs - Specifies the protocol as TACACS.
xtacacs - Specifies the protocol as XTACACS.
tacacs+ - Specifies the protocol as TACACS+.
radius - Specifies the protocol as RADIUS.
Restrictions
Only Administrators can issue this command.
Example
To delete an authentication server host:
DGS-1510-28XMP/ME:admin# delete authen server_host 10.1.1.222 protocol tacacs+
Command: delete authen server_host 10.1.1.222 protocol tacacs+
Success.
DGS-1510-28XMP/ME:admin#
67