D-Link DGS-1510/ME Series Reference Manual page 432

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
49-9 show stp mst_config_id
Description
This command is used to show the MST configuration identification.
Format
show stp mst_config_id
Parameters
None.
Restrictions
None.
Example
show STP MST configuration ID:
DGS-1510-28XMP/ME:admin# show stp mst_config_id
Command: show stp mst_config_id
Current MST Configuration Identification
----------------------------------------
Configuration Name : 00-22-22-22-22-00
MSTI ID Vid list
------- -----------
CIST 1-4094
DGS-1510-28XMP/ME:admin#
49-10 config stp mst_ports
Description
This command is used to configure the ports management parameters.
Format
config stp mst_ports <portlist> instance_id <value 0-7> {internalCost [auto | <value 1-200000000>] | priority
<value 0-240>}
Parameters
<portlist> - Enter a list of ports to be distinguished from the parameters of ports only at CIST level.
instance_id - Specifies the instance ID used.
<value 0-7> - Enter the instance ID used here. This value must be between 0 and 7.
internalCost - (Optional) Specifies the port path cost used in MSTP.
auto - Specifies that the internal cost value will be set to auto.
Revision Level :0
428