D-Link DGS-1510/ME Series Reference Manual page 250

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
Restrictions
Only Administrators and Operators can issue this command.
Example
To erase a file:
DGS-1510-28XMP/ME:admin# dir
Command: dir
Directory of /c:
Idx Info Attr Size
--- ------- ---- -------- ------------------- ----------------
1 CFG(b) -rw- 29661
2 CFG(*) -rw- 29661
3 RUN(*) -rw- 4879040
4 d--- 0
29618 KB total (24697 KB free)
(*) -with boot up info
DGS-1510-28XMP/ME:admin# erase config2.cfg
Command: erase config2.cfg
Success.
DGS-1510-28XMP/ME:admin# dir
Command: dir
Directory of /c:
Idx Info Attr Size
--- ------- ---- -------- ------------------- ----------------
1 CFG(*) -rw- 29661
2 RUN(*) -rw- 4879040
3 d--- 0
29618 KB total (24727 KB free)
(*) -with boot up info
DGS-1510-28XMP/ME:admin#
29-9 move
Description
This command is used to move a file around the file system. Note that when a file is moved, it can be specified
whether to rename at the same time.
Format
move {<drive_id>} <pathname> {<drive_id>} <pathname>
Update Time
2000/04/02 06:03:19 config2.cfg
2000/04/01 05:54:38 config.cfg
2000/03/26 03:15:11 B019.had
2000/04/01 05:17:36 system
(b) -with backup info
Update Time
2000/04/01 05:54:38 config.cfg
2000/03/26 03:15:11 B019.had
2000/04/01 05:17:36 system
(b) -with backup info
246
Name
Name