D-Link DGS-1510/ME Series Reference Manual page 65

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
telnet - Specifies the application as telnet.
ssh - Specifies the application as SSH.
http - Specifies the application as web.
all - Specifies the application as console, telnet, SSH, and web.
login - Specifies the method list of authentication methods for user login.
enable - Specifies the method list of authentication methods for promoting user's privilege to Admin level.
default - Specifies the default method list.
method_list_name - Specifies the user-defined method list name.
<string> - Enter the method list name here. This value can be up to 15 characters long.
Restrictions
Only Administrators can issue this command.
Example
To configure the login method list for telnet:
DGS-1510-28XMP/ME:admin# config authen application telnet login method_list_name login_list_1
Command: config authen application telnet login method_list_name login_list_1
Success.
DGS-1510-28XMP/ME:admin#
5-15 show authen application
Description
This command is used to display the login/enable method list for all applications.
Format
show authen application
Parameters
None.
Restrictions
Only Administrators can issue this command.
Example
To display the login/enable method list for all applications:
61