D-Link DGS-1510/ME Series Reference Manual page 200

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
20-15 show dhcp_relay option_60
Description
This command is used to show DHCP relay option 60 entry by the user specified.
Format
show dhcp_relay option_60 {[string <multiword 255> | ipaddress <ipaddr> | default]}
Parameters
string - (Optional) Specifies to display the entry that contains this string.
<multiword 255> - Enter the string here. This value can be up to 255 characters long.
ipadddress - (Optional) Specifies to display the entry whose IP address equal the specified IP address.
<ipaddr> - Enter the IP address here.
default - (Optional) Specifies to display the default behavior of DHCP relay option 60.
If no parameter is specified then all the DHCP option 60 entries will be displayed.
Restrictions
None.
Example
To show DHCP option 60 information:
DGS-1510-28XMP/ME:admin# show dhcp_relay option_60
Command: show dhcp_relay option_60
Default Processing Mode: Drop
Default Servers:
Matching Rules:
String
-------
abc
Total Entries : 1
DGS-1510-28XMP/ME:admin#
20-16 config dhcp_relay option_61 state
Description
This command is used to decide whether the DHCP relay will process the DHCP option 61 or not.
When option 61 is enabled, if the packet does not have option 61, then the relay servers cannot be determined
based on option 61.
Match Type
---------
Exact Match
196
IP Address
---------
10.90.90.1