D-Link DGS-1510/ME Series Reference Manual page 562

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
DGS-1510-28XMP/ME:admin# disable snmp authenticate_traps
Command: disable snmp authenticate_traps
Success.
DGS-1510-28XMP/ME:admin#
67-27 enable snmp linkchange_traps
Description
This command is used to configure the sending of linkchange traps.
Format
enable snmp linkchange_traps
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To enable the sending of linkchange traps:
DGS-1510-28XMP/ME:admin# enable snmp linkchange_traps
Command: enable snmp linkchange_traps
Success.
DGS-1510-28XMP/ME:admin#
67-28 disable snmp linkchange_traps
Description
This command is used to configure the sending of linkchange traps.
Format
disable snmp linkchange_traps
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
558