D-Link DGS-1510/ME Series Reference Manual page 186

DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
Parameters
default - Specifies to use the Switch's system MAC address as the remote ID.
user_define - Specifies to use the user-defined string as the remote ID.
<desc 32> - Enter the maximum of 32 characters. Space is allowed in the string.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure the remote ID:
DGS-1510-28XMP/ME:admin# config dhcp_local_relay option_82 remote_id user_define D-Lin
k L2Switch
Command: config dhcp_local_relay option_82 remote_id user_define D-Link L2Switch
Success.
DGS-1510-28XMP/ME:admin#
19-6 enable dhcp_local_relay
Description
This command is used to globally enable the DHCP local relay function on the Switch.
Format
enable dhcp_local_relay
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable the DHCP local relay function:
DGS-1510-28XMP/ME:admin# enable dhcp_local_relay
Command: enable dhcp_local_relay
Success.
DGS-1510-28XMP/ME:admin#
182